Hotline
86+0731-58534888,86+13607322318
Hotline:86+ 0731-58534888 86+ 13607322318
The current position:Home > Products > thermal conductivity tester > heat conductivity tester (plate heat flow meter law)
heat conductivity tester (plate heat flow meter law)
- ProductModel：DRPL-III
- Product time：2019/7/17 0:00:00
- Description：this instrument uses internationally the popular heat flow meter examination thermal conductivity and the thermal resistance method, matches the computer to realize the completely automatic examination, the production test report. Uses simulates the aluminum alloy molding actual service condition to carry on the test, faces in the molding joins the stable fire surface temperature openly, the quantity of heat transmits (room temperature) grimly through the molding, the survey transmission"s heat flow may calculate the thermal conductivity and the thermal resistance. The molding environment uses the natural air environment, with the aluminum alloy molding actual use environment match case, the thermal conductivity which and the thermal resistance data obtains not can only judge the aluminum alloy molding accurately the heat-transfer property, moreover provides the powerful data support for the reality engineering design computation. this test method is simple, quick, the duplication is good. Is suitable for the molding heat transfer aspect research and the development. May also use in tests and so on plastic, rubber, graphite, thermal insulation material, widespread application in universities, colleges and institutes, scientific research courtyard, quality testing, factories and mines. this instrument reference standard: ASTM C518-04 uses the heat flow meter law determination stable state heat flux and the heat transfer characteristic testing method.
RELATED ARTICLES
Introduction
major technique parameter
1, fire surface temperature: The room temperature - 99.99℃, used high counted several times obviously shows the temperature measurement, 0.2 levels of precisions, resolution 0.01℃.
2, grim temperature: The room temperature, used high counted several times obviously shows the temperature measurement, 0.2 levels of precisions, resolution 0.01℃.
3, the fire surface control warm: The room temperature - 99.99℃, used the program control number obviously to show the temperature measurement several times high, 0.2 levels of precisions, resolution 0.01℃, plate heater, bidirectional silicon-controlled rectifier control.
4, uses the compulsion forced-air cooling grimly.
5, uses the computer test automation.
6, uses the WPY heat flow meter, heat flow parameter 23.26w/m2*mV.
7, uses the plexiglass shield, but visual observation experiment process.
8, cold hot plate heat transfer area: 150×150 (mm).
9, the cold hot plate may adjust the spacing: 0-160(mm).
Order
Related products：
- DRH-Ⅱ coefficient of thermal conductivity tester (the hot plate method)
- DRM-IIThermal conductivity tester
- DRS-Ⅱheat conductivity tester (discharge of water flat band method)
- DRX-II Hotline thermal conductivity meter
- DRL-II Thermal conductivity meterDescription：
- DRH-II Thermal conductivity tester
- DRJ-IImetal high temperature thermal conductivity tester
- DRL-III Thermal Conductivity Tester(Heat flux) （Upgrade）
- Concrete thermal conductivity detector
- DRH-V Automatic dual flat-panel thermal conductivity detector (guarded hot pla
- WDT-IIDifferential thermal analyzer
- SMDR Meter temperature thermal conductivity of the graphite material
- CRM-II Regenerative coefficient tester
- DRL-V Thermal Conductivity Tester(Heat flux) （Upgrade）
- heat conductivity tester (plate heat flow meter law)
- BRR-II/III Increasment tester
- DRE-III Multifunction Rapid Thermal Conductivity Tester （ HotDisk）
- DRE-V Multifunction Rapid Thermal Conductivity Tester （ HotDisk）
The last product: DRL-V Thermal Conductivity Tester(Heat flux) （Upgrade）
The next product: BRR-II/III Increasment tester